Eastpointe Classified Ad Listings

I have a fantastic project 1938 Deluxe Ford for sale. The bodywork has been completed and this is on a $15,000 Morrison Chassis. It has a 38 Ford 2 Door Body fabricated to fit the chassis. It has a fabricated firewall, hidden hinges, trunk and wheel wells. It is ready for your choice of engine and drive train. The Bodywork is complete. It is ready for the engine, drivetrain and transmission of ...

2157 Trowbridge Ave. 2ND FLOOR 2 BED ROOM, LIVING ROOM DING ROOM AND FRONT ENTRENCE. 2 Bedrooms. 1 Bathroom. 2000 ft

38033 Cherry Lane. Property for Rent in Harrison Twp, MI for $2,350 with 4 bedrooms and 2 full baths, 1 half bath. This 1,632 square foot property was built in 1993 on a lot size of 0.14.. Welcome to 38033 Cherry Lane, a beautifully updated canal-front rental in Harrison Township offering 4 bedrooms, 2.5 bathrooms, and over 1,600 square feet of living space. Renovated in 2025, this inviting hom...

2024 Indian CHIEF DARK HORSE, SPRINGFIELD BL SMK, 49ST, Displacement: 116 cu. in. (1,890 cc) Engine Type: Air-cooled Thunderstroke 116 Bore and Stroke: 4.063 in. x 4.449 in. (103.2 mm x 113 mm) Compression Ratio: 11.0:1 Fuel System: Closed loop fuel injection / 54 mm bore Front Suspension: Telescopic Fork Rear Suspension: Dual Shocks w/adjustable preload Front Brakes: Single / 300mm Semi-Floati...

No longer fly nitro helis so surplus to my needs. Plan to hit the London Swap Meet and can bring these with me. PM if interested.

Office workspace with four walls and a door that can be locked for private work and access needs. Ideal for team and private work. Contains more than one desk in the room and access to private space. Includes access to common work areas or facilities such as a kitchen.. We have a beautiful 100-square-foot furnished office available with updated furniture, flooring, very clean and move-in ready....

It's the start of the build season so the perfect time. 1) Sig 46" floats for 12 - 25 lb craft. Appear to be covered with silk and dope or fine glass weave, then painted. Ready to mount with full plans. $90 2) Unknown manufacturer. Same length. Pics in post #3: $105 I'll be in London for the upcoming swap meet this upcoming Sunday. PM if interested and can meet there to save shipping. ps. Bette...

Grabbed this boat a while ago for the grandsons, but they aged out. Had a remote start nitro engine, (for sale separately) and was removed to mod with electric, (with a reverse ESC. Has a repairable crack in the hull, but otherwise intact. I will be at the London Swap Meet Sunday. If interested, PM with contact info and we can meet up.

I'm selling the craft this was intended to power, so surplus to my needs. Sports a 5mm shaft and includes 4 M3 Allan head cap screws. 3 Turn winding motor Kv 360 4 - 12S LiPo, (15 -44V) Continuous 45A, Burst 60A 1600W Continuous 19 X 19mm Mount pattern I can ship or if anyone plans to head to the Toledo Show next week can meet up there.

I have several engine ready for the new season. All are fresh rebuilds with new bearings. 1) OS50, Modded with new carb and remote needle $80 2) Fox Eagle IV 60, Has the updated head button to allow for higher nitro $100 4) Saito 91 $180 for engine with muffler. Other removed from listing. All have been test run, oiled and stored in the heavy plastic bags, my normal procedure to keep out the en...

Curtis Youngblood MPS5-50 muffler $50 Align 50 size muffler $60 Heli-Max Concept 30 Muffler OS .32 $45 Plan to hit the London Swap Meet and can bring these with me. PM if interested.

Have had this wireless station with 2 displays for several years now and never mounted. Hopefully someone can make use of it. Had to print a new wheel, (with an extra bucket).

Good used Scorpion S-5525-225KV brushless motor. High-quality Scorpion motor, ideal for larger electric R/C aircraft. Motor is in good used condition. Specs: 225KV Scorpion S-5525 series Suitable for large-scale electric aircraft Good used condition Includes shipping to anywhere in Canada.

I have cleaned out some of my spares, collecting together stuff I'll likely no longer need. The mounting blocks are for larger scale and are heavy duty. Both appear to be for 1/4", (6mm) $30 There are also two reinforced plastic frame blocks that would fit onto a bulkhead with .200", (5mm) holes $20. There are a pair of new, larger scale spring-extend pneumatic units of unknown make that fit a ...

I'm cleaning out my spares bins. Here are bits left over, most if memory correct from an Ergo 46 and TREX 600, (flybar head) but with the 10mm shaft they can be adapted to others. $110 for all Nitro starter shaft $50 Will fit starter in my other add here: https://www.rccanada.ca/rccforum/sho...d.php?t=657757 I will be at the London Swap Meet this Sunday and can meet there to avoid the postal st...

I'm upgrading to FBL for a future scale project so this is extra. This includes the swash and fits a 10mm shaft, (same as many others of that size). Includes extra paddles, as well. I also have another that is in excellent shape. Just need to remove the blades. I will be at the London Swap Meet Sunday. If interested, PM with contact info and we can meet up.

Good used Jeti Spin 99 Opto PRO brushless electronic speed controller. High-quality Jeti ESC designed for larger electric R/C aircraft. ESC is in good used condition. Specs: 99A continuous current 4 12S LiPo Opto isolated Designed for high-voltage / large-scale electric setups Good used condition Shipping included to anywhere in Canada.

This is the Dremel Scroll Saw where the blade travels vertically without moving forward and back like the CDN tire type. This allows very accurate cuts right into the corners. Included are 20 something blades of differing teeth per inch. Even the finest will easily cut 1 inch stock. It has a 15 inch throat.

Cannot remember why I ended up with these, not if test flew. Basically new in the box. $20 each or $35 for the pair. Plan to hit the London Swap Meet and can bring these with me. PM if interested.

Removed this from a boat for sale in another thread to convert to electric. Modded the remote start to brushless. I will be at the London Swap Meet Sunday. If interested, PM with contact info and we can meet up.